Sundeck foundation - Álfur with Beam shoe 45 w/ Long nut

The composite solution contains

• 1 pc. D030 Álfur
• 1 pc. DF051 Beamshoe 45 HG w/ Long nut
• 1 pc. DF002 Threaded rod 100 M16 HG w/track
• 1 pc. DF027 Bolt M10x60 HG. and Nut

Álfur

Álfur is a great base when you need a low but strong pillar.

The design of the pillar means that if it is dug down and compressed, it needs multiple weights to pull it up again.
The pillar is 30 kg but the towing weight is 70 kg when it is buried.

Álfur is made of C45 (MPa) concrete.
There is a strong 8mm iron rebar in the pillar that connects to the socket at the top.

Sizes

• Weight 30 kg
• Towing weight 70 kg
• Height 30 cm
• Top 15x15 cm
• Bottom 30 x 30 cm

BEAM SHOE 45 HG w/ Long nut

Underneath the bottom of the Beam shoe is welded a 16mm long nut, which fits the threaded rod that is screwed into the top of the Dwarves,
then it is possible to adjust the height and direction of the Beam Shoe so that it fits in the horizontal position of the beam that will be attached to it.
The long nut improves the Beam shoes height adjustment even more and makes installation easier.

The beam is then fastened with a bolt M10x60.

There are also holes for screws on the sides of the Beam shoe.
The beam shoe fits well for a 45 mm (2″) beam as a base for a sun deck.